Code Setting - iQ Pet iQ Plus+Duo Owner's Manual

Warning
1. Fully charge the unit before using it for
the first time.
2. Do not charge the batteries near any
flammable substances.
3. Fully charge the batteries if the unit is
to be stored without use for a period of
one month or more.
4. Always use iQ Pet approved chargers.
If improper chargers are used, the LED
will flash in amber or may not light up
at all.
46
7. CHARGING THE BATTERY

8. Code Setting

1-Dog code setting
1. Start with the receiver/collar turned off
and the Rheostat intensity dial level on
the handheld transmitter set to "0".
On the handheld transmitter, slide the
dog selector switch left to align with "I".
2. Place the red dot on the back of the
handheld transmitter to the red dot on
the receiver/collar. Hold the two red
dots together for 5 seconds.
Release them when the green LED
blinks rapidly on the receiver/collar.