Charging The Battery - iQ Pet iQ Plus+Duo Owner's Manual

7. CHARGING THE BATTERY

1. Remove the rubber plug temporarily
and plug in the charger.
2. Plug the adapter's power plug into a
standard AC wall outlet. The LED will
glow red.
3. When charging is finished the LED
will glow green. Unplug the adapter's
power plug from the AC wall outlet and
disconnect the charger from the unit.
4. Place the rubber plug back in the
battery charging receptacle.
* The receiver/collar is still fully
waterproof even if the rubber plug is
not closed, but place the rubber plug in
the battery charging receptacle to make
sure dirt does not get inside.
* To charge multiple receivers/collars and
a transmitter, combine additional battery
charger splitter cables as shown.
7. CHARGING THE BATTERY
45