How To Fit The Receiver/Collar On The Dog - iQ Pet iQ Plus+Duo Owner's Manual

3. HOW TO FIT THE RECEIVER/COLLAR
ON THE DOG
The receiver/collar should be fitted so that
the surgical stainless steel contact points
press firmly against the dog's skin. When
properly fitted, you should be able to fit
a finger or two snugly in between the
contact points and your dog's skin. When
properly fitted, the receiver/collar should
not move on the dog. The best location
for the receiver/collar box is either side of
the dog's windpipe.
A loose fit can allow the receiver/collar
to move around on the dog's neck. When
this happens, the contact points may
rub the skin and cause irritation. If the
receiver/collar is too tight, the dogs may
have difficulty breathing.

3. HOW TO FIT THE RECEIVER/COLLAR ON THE DOG

41