Real Flame PIT FIRE SERIES Installation & Operating Manual page 15

INSTALLATION INSTRUCTIONS
• Note appliance gas type – Natural gas or ULPG. Should the appliance be the incorrect gas
type please contact the supplier.
• Gas isolation valve is to be accessible and located outside the enclosure.
• Ensure wiring to the appliance is protected and not creating a hazard.
• Installers – Please ensure the installation and instruction manuals supplied with this
appliance are supplied to the customer and the customer is trained on how to operate the
appliance correctly.
• Do not modify the appliance.
• Do not exceed maximum rated pressures.
• Appliance must be installed with gas installation code (AS/NZS5601.1-2013) and applicable
electrical installation code (AS3000).
• Test for gas leaks prior to operating appliance.
• Check gas pressures and adjust if incorrect.
• Auxiliary switch locations. – Auxiliary on/off switches must located to enable viewing of the
fireplace operation.
• Appliance must be supervised at all times during operation.
(continued)
15