Table of Contents
Advertisement
INSTALLATION REQUIREMENTS
• All ALIF units linked with the A.I.M. server must have firmware version 3.3 or greater.
• On the network switch(es) that have A.I.M. server(s) attached, ensure that the
option is enabled on each port to which an A.I.M. unit is connected. Where portfast
is not enabled, if a second A.I.M. is added for redundancy, this could result in a mis-
configured back up server.
• If an existing A.I.M. server must be replaced, follow the important advice given within
Appendix C (Swapping out an A.I.M.
server).
• When configuring the installation for multicasting (and to improve overall
performance), the network switch(es) being used must support a minimum of
snooping. For faster performance use switches that support IGMP v3.
• In order to display video resolutions that use a horizontal video resolution of 2048
pixels, the network switch must have support for
• Please also see
Appendix A - Tips for success when networking ALIF
portfast
IGMP v2
Jumbo
packets.
units.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Infinity and is the answer not in the manual?
Questions and answers