ADDER Infinity User Manual page 32

Hide thumbs Also See for Infinity:

Table of Contents

Enlarged version

Transmitters > Configure New Transmitter

This page is displayed whenever a new transmitter is added to the network.

The IP Address 1 field, showing 0.0.0.0, is for an unconfigured device on its zero config

address. Before A.I.M. can add the device into its database, a new IP address must be

added to IP Address 1. This is the system IP address and applies equally for ALIF (1000

series) and ALIF dual (2000 series).

ALIF dual units have a Teaming port which provides a second 1Gigabyte link port which

can be used for bandwidth doubling and/or redundancy. The IP address 2 field is for the

Teaming port. In order to use the Teaming port, IP address 2 field must be given a valid IP

address. For ALIF (1000) units, this field will remain blank.

Table of Contents