Table of Contents
Advertisement
Receivers > Configure Receiver
From the View Receivers page, you can configure details for a receiver:
• Click
for a receiver.
Note: If the IP address of the receiver is changed, the device will need to reboot itself.
Login Required
• No: When selected, anyone can use a receiver terminal and connect to a channel. The
channels/permissions displayed to this anonymous user are those that are set for the
"anonymous user" that is defined within the
• Inherit from Receiver Groups: When selected, the requirement for user login will
be determined by the "Login Required" settings within the Receiver Groups to which
this unit belongs:
• If ANY of the receiver groups (to which this receiver belongs) are set as "Login
Required = Yes", this receiver will require login.
• If ANY of the receiver groups (to which this receiver belongs) are set as "Login
Required = Inherit..." and the global setting is "login required = yes", then this
receiver will require login.
• If ALL receiver groups (to which this receiver belongs) are set as "Login Required =
No", then this receiver will NOT require login.
• Yes: When selected, a user will need to login with the username and password defined
in the "Users" section. They will only be allowed to login if they have been granted
permission to access that particular receiver.
Receiver OSD Alerts
Determine the required setting for pop up OSD alerts: Inherit, No or Yes.
The next fields are the USB settings
Audio Input Type
Select the required audio input type.
Video Compatibility Check
This reads the EDID from the attached monitor and determines whether the monitor is
capable of displaying the selected video mode before connecting a channel. This prevents
the receiver showing a black screen and the user being locked out because a dual link
resolution has been selected to display on a single link monitor.
Force 60Hz
If enabled, the receiver frame rate is held at 60Hz regardless of the video input frame
rate. The Video Switching options (below) cannot be altered when this option is enabled.
Dashboard > Settings
page.
Video switching
Provides two options for video switching:
• Fast Switching (default state) - Retains the same frame rate (at either 50Hz or 60Hz)
depending upon which video resolution was displayed first.
• Match Frame Rate - Follows the source frame rate and will change the frame rate every
time this changes even if the video resolution doesn't change. If you have one receiver
switching between 1920x1080@60Hz and 1920x1080@50Hz then this setting will
change the frame rate from 60Hz to 50 Hz every time that you switch.
Receiver Keyboard Country Code
Select the country code of the keyboard connected to the receiver.
Group Membership
To facilitate collective permission-granting for numerous receivers, a receiver can
belong to one or more receiver groups. Any permissions applied to the receiver group
are inherited by all receivers that are included within the receiver group. For example,
multiple receivers can be made available to a user by placing them all in a receiver group
and then granting the user permission to use that receiver group.
Permissions
This is hidden by default as, by default, all users have access to all receivers. You can deny
access to particular receivers for a user in this section. However, be aware that users
who are included within user groups may have access to the same receivers via their
groups.
USB Settings
See next page.
26
Advertisement
Table of Contents
