Upgrading (Or Downgrading) A.i.m. Firmware - ADDER Infinity User Manual

Upgrading (or downgrading) A.I.M. firmware

In certain circumstances it may be necessary to upgrade or downgrade the firmware of
an A.I.M. unit to take advantage of particular features. The Upgrade AIM Software option
changes the firmware without affecting configuration data such as devices, channels,
presets, users, groups and logs.
Note: Although configuration details are not affected during the firmware upgrade process,
you are recommended to take a backup onto an external device before starting the upgrade
process.
Note: When changing the A.I.M. firmware, it will be necessary to reboot the unit in order to apply
the changes.
To upgrade/downgrade the A.I.M. unit firmware
1 Download the appropriate firmware file from the Adder website or technical support.
2 Visit the Dashboard > Updates page of the A.I.M. unit and within the 'Upgrade AIM
Software' section, click the Browse... button to locate the downloaded firmware file.
3 When you are ready to proceed, click the Upload button. The file will be uploaded,
checked and applied to the secondary partition within the A.I.M. unit. A confirmation
message will be displayed and you will also be prompted to reboot the A.I.M. unit.
4 When it is appropriate to do so (dependent on the current activity of the A.I.M. unit),
click OK and then click the Reboot Now button. The A.I.M. unit will reboot using the
new firmware partition.
20