Table of Contents
Advertisement
Connecting Devices to your TV
You have several options for connecting your TV to different devices. The method in which you connect will be based upon the type
of cables you have and the available outputs on your device.
Connecting an antenna, cable set-top box or satellite receiver
To connect an antenna,cable set-top box or satellite receiver:
1.
Connect one end of a coaxial cable (not included) to the [RF OUT] jack on the antenna, cable or satellite box. If you are using
an antenna with twin-lead cable, you may need a 300-75 Ohm adapter (not provided) to connect it to the back of your TV.
Likewise, if you are using several antennas, you may need a combiner (not provided).
2.
Connect the other end of the cable to the [ANT/CABLE IN] jack on the side of TV.
3.
Using your remote, press the [INPUT] button and select TV as the input source.
Connecting a Satellite Receiver, DVD player (or other Audio Visual (AV) device
with a composite video cable (yellow/red/white)
To connect an AV device with a composite video cable (not provided):
1.
Use the audio and video cables to connect the composite video/audio jacks (of the external AV device) to the [AV IN] jacks
of the TV. (Video = yellow, Audio Left = white, and Audio Right = red).
2.
Plug the connected devices into the AV connectors on the TV before switching it on.
3.
Using your remote, press the [INPUT] button and select AV as the input source.
TV JACK
Connecting Devices to your TV
(not included)
TV JACK
ANT
CABLE IN
Figure 1. Antenna, cable set-top box or satellite receiver to the TV
Yellow or Green(Video)
Video Cable
(not included)
Red(R)
Audio Cable
White(L)
(not included)
Figure 2. AV device with a composite video cable
EXTERNAL DEVICE
Cable Set top box
or
ANT OUT
RF Out
Video
Yellow(Video)
R
Red(R)
L
White(L)
AV OUT
2
EXTERNAL DEVICES
VCR
DVD Player/Recorder
Video
Satellite
Set-top box
antenna
Camera
cable
Satellite Receiver
Hide quick links:
Advertisement
Table of Contents
