Table of Contents
Advertisement
8
To play from the component video device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select Component,
3 Turn on the component video device and start playback. Refer to
the instructions that came with the component video device.
Connecting an antenna, cable TV, or
satellite TV box
If you are connecting a satellite TV or cable box, you can use one of the
following (if available):
Best - HDMI cable
Better - Video component cables
Good - Video composite cable
Acceptable - 75-ohm coaxial cable.
To connect an antenna, cable TV, or satellite TV box:
Connect one end of a 75-Ohm, coaxial cable to the
on the back of the TV, then connect the other end of the cable to
the antenna or cable TV wall jack.
Home antenna terminal
(75 ohm)
Notes:
We recommend using a 75-Ohm, coaxial cable to reduce interference
and noise that may be caused by radio wave transmissions.
Do not bundle the coaxial cable with the power cord or any other
cables.
If you are using an antenna and reception is not good, contact a
service technician to adjust the antenna.
Connecting a VCR, camcorder, or game
console
Note: If the VCR, camcorder, or game console has component jacks
(better), or an HDMI jack (best), connect them using the best available
connection.
To connect a VCR, camcorder, or game console:
1 Make sure that your TV's power cord is unplugged and the VCR,
2 Connect one end of a standard AV cable (not included) into the
AV video jack on the back of the TV, then connect the other end
of the cable to the AV OUT VIDEO jack on the external device.
then press ENTER.
ANT IN jack on
the side of the TV
Antenna, cable TV,
or satellite box
75-Ohm coaxial cable
Y
P
P
L
R
R
B
ANT/CABLE SERVICE
COMPONENT IN
3 Connect the audio connectors of the AV cable (the red and white
connectors) to the AV OUT AUDIO jacks of the external device,
then connect them to the AV L and R jacks on the back of your TV.
PC AUDIO IN
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
ANT IN
jack
To play the external AV device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select Video, then press ENTER.
3 Turn on the device, then start playback on the device.
Connecting a computer
To connect a computer:
1 Make sure that your TV's power cord is unplugged and the
2 Connect one end of a VGA cable (not included) to the VGA jack on
the side of the TV, then connect the other end of the
VGA jack on the computer.
The D-Sub cable will not supplied with the product.
We strongly recommend to use D-Sub cable with 2 cores as shown
HDMI 1
Audio cable
3 Connect one end of an audio cable with a stereo mini-plug (not
included) to the PC AUDIO jack on the side of the TV, then
connect the other end of the cable to the AUDIO OUT jack on
the computer.
To play video from the computer:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select PC, then press ENTER.
3 Turn on the computer, then adjust the computer display
properties as needed.
Making connections
PC IN
DIGITAL
HDMI 2
RJ12
AUDIO
VGA
AUDIO OUT
OUT
VCR, camcorder,
or game console
PC IN
DIGITAL
HDMI 2
RJ12
PC AUDIO IN
VGA
AUDIO OUT
VGA
cable
Computer
VIDEO
L
R
USB
AV IN
AV cable
cable to the
VIDEO
L
R
AUDIO
USB
AV IN
OUT
Advertisement
Table of Contents
