Parameters For Rom - Ricoh DDP 70e Programming Manual

Parameters for ROM

The factory default values for the
below.
Key Type
BlockSize*
integer
CartridgeID *
integer
CartridgeType *
integer
Free*
integer
HasNames*
boolean
InitializeAction
integer
LogicalSize *
integer
Mounted
boolean
PhysicalSize *
integer
Removable*
boolean
Searchable
boolean
SearchOrder
integer
Type*
name
Writable*
boolean
* Value is a read-only constant.
device parameters in the printer are shown
%rom%
%rom% Device Parameters
Default
1 See Section 3.3 of the Supplement.
9110 See Section 3.3 of the Supplement.
4 See Section 3.3 of the Supplement.
0 See Section 3.3 of the Supplement.
true See Section 3.3 of the Supplement.
0 See Section 3.3 of the Supplement.
449104 See Section 3.3 of the Supplement.
true See Section 3.3 of the Supplement.
449104 See Section 3.3 of the Supplement.
false See Section 3.3 of the Supplement.
true See Section 3.3 of the Supplement.
11 See Section 3.3 of the Supplement.
/FileSystem See Section 3.3 of the Supplement.
false See Section 3.3 of the Supplement.
PostScript Language Printer Commands
For More Information
1-21