Compatibility; Level 1 Compatibility Operators - Ricoh DDP 70e Programming Manual

Compatibility

Level 1 Compatibility Operators

The following operators are included for compatibility with existing Level 1 PostScript
language driver software. These compatibility operators are present in Level 3 printers
for compatibility purposes only and their use in PostScript Level 3 language programs
is strongly discouraged.
The following compatibility operators are present in the printer. They are listed here in
three groups by dictionary. See "Compatibility Operator Descriptions" on page 1-29for
information about those compatibility operators which are not found, or differ from, the
ones documented in Chapter 6 of the Supplement.
a3tray
a4tray
b5tray
buildtime
byteorder
checkpassword
defaulttimeouts
diskonline
diskstatus
doprinterrors
dostartpage
dosysstart
duplexmode
firstside
initializedisk
jobname
jobtimeoutledgertray
11x17
a3
a4
a4small
a5
devdismount
devforall
1-28 PostScript Language Printer Commands
Operators in statusdict
legaltray
lettertray
manualfeed
margins
newsheet
pagecount
pagestackorder
printername
product
realformat
resolution
revision
sccinteractive
setdefaulttimeouts
setdoprinterrors
setdostartpage
setdosysstart
Operators in userdict
b4
b5
folio
ledger
legal
Operators in systemdict
devformat
devmount
setduplexmode
setjobtimeout
setmargins
setpagestackorder
setprintername
setsccinteractive
setsoftwareiomode
settumble
setuserdiskpercent
softwareiomode
tumble
userdiskpercent
waittimeout
11x17tray
letter
lettersmall
note
devstatus