Product Strings; Model Strings; Device Parameters - Ricoh DDP 70e Programming Manual

Product Strings

The systemdict operators
have the following values in the printer.
String Name
languagelevel
revision*
serialnumber
version
* Also defined in statusdict.

Model Strings

The systemdict operators
String Name
LicenseID
PrinterName
product*
* Also defined in statusdict.

Device Parameters

Device parameters are set using the operator
currentdevparams
require a password, are global to the PostScript environment, and have similar
persistence characteristics. As with system parameters, some of these parameters can
be stored in non-volatile memory.
One property that distinguishes device parameters from both system and user
parameters is that device parameters may be interdependent: the legality of a value for
a given parameter might depend on the value of another parameter.
:
NOTE
Even if two products have the same device parameters set name, the
parameters in the set might differ; for example, because the hardware
support for that device differs.
1-18 PostScript Language Printer Commands
languagelevel, product, revision, serialnumber,
Type
integer 3
integer 1+
integer randomly determined at startup
string 3015.103
and
LicenseID PrinterName
Type
70 ppm:
(LN-091-002) Roman Font
(LN-091-003) Morisawa 2 Font
(LN-091-001) Morisawa 5 Font
integer
92 ppm:
(LN-091-004) Roman Font
(LN-091-005) Morisawa 2 Font
(LN-091-006) Morisawa 5 Font
(Enter the name of the printer here,
string
depending on the model.)
string (Enter the name of the product here.)
. Device parameters are similar to system parameters in that they
Value
have the following values.
Value
and read using the operator
setdevparams
and
version