Compatibility Operator Descriptions - Ricoh DDP 70e Programming Manual

Compatibility Operator Descriptions

Some of the following compatibility operators use tray numbers to represent paper tray
locations or feeding methods. The table below lists the tray numbers and the
corresponding meanings for the printer. The compatibility operators listed here were
implemented and defined for the printer.
Tray Numbers and Their Meanings in the Compatibility Operators
Tray #
0
1
2
3
4
*1
10
*1
11
*2
20
defaultpapertray defaultpapertray int
The operator returns the first element of the
dictionary found within the current page device. This number represents the default
paper tray slot which may or may not be installed. If there is no
InputAttributes
number will be returned.
Errors: stackoverflow
papertray papertray int
This operator returns the first element of the
dictionary found within the current page device. This number represents the current
paper tray slot which may or may not be installed. If there is no
InputAttributes
be returned.
Errors: stackoverflow
<Tray 1>
<Tray 2>
<Tray 3>
<MBT>
<HCF>
<Inserter tray 1>
<Inserter tray 2>
<Inserter tray>
*1: Publishing Finisher only.
*2: Booklet Finisher only - 92 ppm
at the time that
defaultpapertray
at the time that
papertray
PostScript Language Printer Commands
Meaning
array in the
Priority
is executed, some arbitrary slot
array in the
Priority
is executed, some arbitrary slot number will
InputAttributes
array within
Priority
InputAttributes
array within
Priority
1-29