Checking Wheel Bolt Torque; Every 100 Hours; Lubricating Grease Fittings - Kubota M8540 NARROW Operator's Manual

BChecking Wheel Bolt Torque
To avoid personal injury:
A Never operate tractor with a loose rim, wheel,
or axle.
A Any time bolts and nuts are loosened, retighten
to specified torque.
A Check all bolts and nuts frequently and keep
them tight.
Check wheel bolts and nuts regularly especially when
new. If they are loose, tighten them as follows.
(1)
168 to 196 (17.1 to 20.0)
N-m (kgf-m)
(2)
260 to 304 (26.5 to 31.0)

EVERY 100 HOURS

BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 100 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle gear case support) [RH, LH]
PERIODIC SERVICE 67