Kubota M8540 NARROW Operator's Manual page 33

3. Place the shift levers in "NEUTRAL"
position.
(1) Hydraulic-shuttle shift lever
(2) Main gear shift lever
4. Place the PTO clutch control switch in
"OFF" position and hydraulic control
levers in "LOWEST" position.
(1) PTO clutch control switch
(2) Position control lever
(3) Draft control lever
(N) "NEUTRAL POSITION"
"ON" "OFF"
(A) "DOWN"
OPERATING THE ENGINE
5. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever
(2) Foot throttle
6. Insert the key into the key switch and
turn it "ON".
"OFF" (Engine-Stop)
Electrical
ACC
Power-accessories
NOTE:
ACC... A The accessories can be used while the
engine is stopped.
A Do not leave the key at "ACC" position. The
battery will be quickly discharged. Turn it
back to "OFF" after use.
13
"INCREASE"
"DECREASE"
"ON" (Engine-Run)
"START"
(Engine-Start)