Hydraulic Control Unit Use Reference Chart - Kubota M8540 NARROW Operator's Manual

44 HYDRAULIC UNIT
BHydraulic Control Unit Use Reference Chart
In order to handle the hydraulics properly, the operator must be familiar with the following.
Though this information may not be applicable to all types of implements and soil conditions, it is useful for general
conditions.
Implement
Soil condition
Light soil
Moldboard plow Medium soil
Heavy soil
Disc plow ---
Harrower (spike,
springtooth, disc
type)
---
Sub-soiler...............
Weeder, ridger........
Earthmover, digger,
scraper, manure
fork, rear carrier......
---
Mower (mid- and
rear-mount type)
Hayrake, tedder......
(1) Position control lever
Top link mounting holes
(2) Draft control lever
3
2 or 3
Draft and Mixed control
2
(Place the draft control lever
2 or 3
to the suitable position and
set the implement pull with
the position control lever.)
2
1 (Hold the draft control lever
at the front most position
during operation.)
Gauge wheel
YES/NO
YES
YES/NO
Position control
NO
Remarks
(1) Telescopic
stabilizers
Insert the set-pin
through the slot
on the outer
tube that align
with one of the
holes on the
Loose inner bar.
For implements
with gauge
wheels, lower
the position
control lever all
way.
Telescopic
stabilizer should
be tight enough
to prevent
excessive
implement
movement when
Tighten implement is in
raised position.
For implements
with gauge
wheels, lower
the position
control lever all
way.