Selecting The Light Path (U-Tr30-2 Only); Adjusting The Tilt - Olimpus CKX41 Instruction Manual

@
14
@
Fig. 16
@
Fig. 17
5

Selecting the Light Path (U-TR30-2 Only)

Slide the light path selector knob 1 to select the desired light path.
Light Path
Symbol
Selector Knob
Pushed in
Middle position
Pulled out
# The U-CTR30-2 trinocular observation tube does not have the light
path selector knob and its light intensity ratio is fixed at 50% binocular
and 50% TV/photography.
6

Adjusting the Tilt

}When using the U-CTBI or CKX-TBI, adjust the height and tilt of the obser-
vation tube to obtain the most comfortable viewing position.
Holding the binocular section with both hands, raise or lower it to the
desired position.
· U-CTBI/CKX-TBI: 30 to 60°
# Never attempt to force the binocular section past the upper or lower
stop position. Applying excessive force could destroy the limiting
mechanism.
# The connectable eyepieces are the WHB10X only or the CKX-TBI
and the built-in eyepieces (10X) for the U-CTBI. Combination with
any other eyepiece will result in insufficient illumination at the pe-
riphery of the field of view.
When adjusting the tilt of the U-CTBI, be careful not to have your
fingers caught by the spaces @ between the binocular assembly
and cover.
Intensity Ratio Applications
100% for binocular Observation of dark
eyepieces specimens
20% for binocular Observation of
eyepieces, 80% for bright specimens,
TV/photography photography, TV
observation
100% for TV/ Photography, TV
photography observation
(Fig. 16)
(Fig. 17)