Headphone Socket; Software Version - Sangean HD Radio HDT-20 User Manual

Contrast
The contrast of the display can be adjusted.
1. Repeatedly pressing the Menu button until 'Contrast' is shown on the
display.
2. Rotate the Tuning control knob to adjust the contrast. The contrast
level indication on the screen will change at the same time. When
you find the setting that gives the best legibility for the location in
which the radio is used, press the Tuning control knob to save the
setting.
Dimmer
The brightness of the display can be adjusted when the radio is in
Standby mode or when it is in use. In order to adjust the intensity of the
display to suit the ambient room lighting:
1. Repeatedly pressing the Menu button until 'Dimmer' is shown on the
display.
2. Rotate the Tuning control knob to adjust your required brightness
level and press the Tuning control knob to save the setting.
Language
Your radio can be configured to a different language.
1. Repeatedly pressing the Menu button until 'Language' is shown on
the display.
2. Rotate the Tuning control knob to select your required language.
3. Press the Tuning control knob to confirm your selection. The display
will change to the chosen language.

Headphone socket

A 3.5mm Headphone socket located on the front of your radio is
provided for use with headphones. Please be aware that the sensitivity
of headphones can vary widely. We therefore recommend setting the
volume to a low level before connecting headphones to the radio.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause
hearing loss.
Line out socket (3.5mm Jack)
A pair of Line out RCA jack located on the rear of your radio is provided
for connecting the audio signal to an external amplifier. The signal on
the Line out socket is unaffected by the volume control.
Optical and Coaxial S/PDIF output socket
Two types of digital output sockets are provided, an S/PDIF or Digital
Coax connections are provided on the rear of your radio for connection
to an amplifier or other equipment with a digital input.

Software version

The software version display cannot be altered and is just for your
reference. Repeatedly pressing the Menu button until 'Host Version' and
'DSP Version' are shown on the display, you can now view the software
version on the display.
GB
12