How To Operate; Control And Remote Control Operations; Inserting The Remote Control Batteries - Friedrich CP18 Installation And Operation Manual

6 7
5 4 3
4. CHECK FILTER & FILTER RESET
Check Filter: Your 'Check Filter' LED will
light up after approximately 250 hours of
operation, notifying you that your filter needs
to be cleaned.
Filter Reset: press 'Temp ∨∧' together to
turn off 'Check Filter' light.
*Filter Reset must be done from unit control
panel, not remote control
6. OPERATION MODE SELECTOR
Push the 'Mode' button to rotate between
MoneySaver → Cool → Fan → Dry modes.
(select Dry mode for dry/dehumidifier
operation)
8
2 1
8
7
MoneySaver: The fan will stop when the compressor
stops cooling. The fan will turn on approximately
every 3 minutes to sample to room air and determine
if more cooling is needed.
Cool: fan runs continually for normal cooling operation
Fan Only: Fan-only operation
*MoneySaver has it's own button on your remote
control
*Timer Clear: On remote control, 'Timer Clear' button
will cancel the timer setting
6
3
5
2