General Safety Warnings; Installation; Operation; Servicing & Support - Maxview gazelle pro B2414 Installation And User Manual

Thank you for purchasing this product, we trust that you will get many years of enjoyment with this product.
Should you have any difficulty using your Gazelle Pro please contact our friendly Customer Helpline on 01553 811000
or email support@maxview.co.uk. Please retain these instructions for future reference.

General Safety Warnings

Read these instructions carefully and become familiar with your Maxview product. Understand the application, limitations and
any hazards involved with the installation and operation.
Failure to follow all instructions may result in damage to your vehicle and/or serious injury. Maxview declines all responsibility
in the event of incident or accident if they are due to a non observation of the installation instructions or the way the product
is used.
No modifications to the product are permissible.

Installation

• Always consider the additional height the product you install adds to the vehicle
• Always follow manufacturers operating instructions before using tools and equipment.
• Take care when working at heights. Keep work area clean and tidy to avoid trip hazards
• Use creeper boards where necessary to ensure roof construction can support your weight
• Always use a recommended flexible adhesive for sealing/bonding the product to a vehicle roof and refer to the manufac-
turer's instructions for application and curing times. We always recommend that you do not travel until the curing times have
been met.
• All electrical work should be carried out by a competent person

Operation

• Before starting your journey check the product is in the correct travel position
• The maximum speed of vehicle with product mounted on roof is 81mph (130km/h)
Servicing & Support
• Any inspection or repair must be carried out by Maxview or an appointed representative of the manufacturer
• No regular maintenance required on the product
• Do not dismantle product
• Do not use solvent or abrasive cleaning agents on the product
• Only use a suitable mild detergent to clean the product
• Do not pressure wash the product
• We recommend you check the mechanical integrity of a roof mounted product at least once a year
• If in the event that you do experience a problem with the product call Maxview Customer Service +44 (0)1553 811000
For Variable Signal Booster
• This booster is only suitable for vehicles with a negative chassis earth
• Disconnect battery before starting installation
• Do not install appliance where it could be exposed to dripping or splashing water
• For indoor use only
Page 2