Table of Contents
Advertisement
Additional Information
General Safety Warnings
Read these instructions carefully and become familiar with your Maxview product. Understand the application,
limitations and any hazards involved with the installation and operation. Failure to follow all instructions may
result in damage to your vehicle and/or serious injury. Maxview declines all responsibility in the event of incident
or accident if they are due to a non observation of the installation instructions or the way the product is used.
No modifications to the product are permissible.
Installation
• Always consider the additional height the product you install adds to the vehicle
• Always follow manufacturer's operating instructions before using tools and equipment.
• Take care when working at heights. Keep work area clean and tidy to avoid trip hazards
• Use creeper boards where necessary to ensure roof construction can support your weight
• All electrical work should be carried out by a competent person
Operation
• The maximum speed of vehicle with product mounted on roof is 81mph (130km/h)
Servicing & Support
• Any inspection or repair must be carried out by Maxview or an appointed representative of the manufacturer
• No regular maintenance required on the product
• Do not dismantle product
• Do not use solvent or abrasive cleaning agents on the product
• Only use a suitable mild detergent to clean the product
• Do not pressure wash the product
• We recommend you check the mechanical integrity of a roof mounted product at least once a year
• If in the event that you do experience a problem with the product, call Maxview Customer Service
+44 (0)1553 811000
Maintenance
The Roam has been designed to be maintenance and trouble free. For optimum signal strength, keep the
cover clean from dirt, bugs, and other debris. Periodic washing of the top cover with mild soap and water
is recommended.
1. Do not remove the cover of the antenna as it will void the limited guarantee.
2. Never power wash the antenna. Keep the enclosure clean from dirt, bugs, and other debris by hand
washing with mild soap and water.
DO NOT USE SOLVENTS TO CLEAN THE ROAM. DO NOT DROP OR EXPOSE TO JARRING MOVEMENTS.
Terms and conditions
In no event shall Maxview be liable for any indirect, incidental or consequential damages from the sale or use of
the product. This disclaimer applies both during and after terms of the guarantee. This does not affect your
statutory rights. The Roam 5G antenna is designed for permanent installation and is not designed to be removed
or serviced. Whether the Roam is in warranty or not and whether the cause for removal is our fault or not, we are
not responsible for the safe removal of the Roam 5G antenna. We will not be held responsible or liable for any
damage done to the Roam or other property whilst removing the antenna, regardless of the reason for removal.
By selling a Three™ SIM card we are acting completely independent of Three™ and any information you supply
or any contract you enter in to is your own choice. We will not be held liable for any costs incurred as a result of
using Three ™ services. Three™ is a trading name of Hutchinson 3G UK Limited. Data usage can be expensive.
Although the Roam 5G does offer data warning and restriction warnings, this should be used as a guide only, it is
not always completely accurate. For accurate data usage information, you should contact your service
31
provider. We will not be liable for any costs incurred as a result of data usage using the Roam.
Advertisement
Table of Contents
