Mio MIVUE 618 User Manual page 20

- EV: Sets the proper exposure level (-1 ~ +1) to adjust the brightness of the image. The
default setting is 0.
- G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High) of the
G sensor that allows automatic triggering of the event recording while continuous
recording is in progress.
- Stamps: Sets the information (Coordinates or G-Sensor) that will be displayed on the
recorded video.
ƒ System
Allows you to change the system settings of the device.
- Satellites: Displays the status of GPS/GLONASS signal reception. You can press
and then select GPS* or GLONASS for better signal reception if the need arises.
* GPS is recommended for use in North America regions.
- Date/Time: Sets the system date and time. For more information, see the "Setting
the date and time" section.
- System Sound: Enables or disables system notification sounds.
- Volume: Adjusts the volume level.
- LCD Standby: Selects Always On to keep the LCD on; or sets the timer for the LCD
to turn off automatically (10 sec, 1 min or 3 min) after recording starts. Selecting
Standby will turn off the LCD (in specified time) but still display the time and speed
information.
- Language: Sets the language.
- Distance Unit: Sets the preferred distance unit.
- Storage Allocation: The system provides 3 default memory configurations to store
the videos and photos. Select the proper configuration based on your usage.
- Restore to Defaults: Restores system settings to factory defaults.
- Version: Displays the software information.
ƒ Format
Formats a memory card. (All data will be erased.)
19
en