Canon ZR600 Instruction Manual page 26

_ When the camcorder shuts off automatically, the record review and record search
• functions will not work. To resume normal operation turn the
IB3i1
switch to •
and then back to CAMERA.
•
"~"
starts flashing in red when the
battery pack is empty.
• When you attach an empty battery
pack, the power may turn off without
displaying
"~".
• The actual battery charge may not be
indicated accurately depending on the
conditions under which the battery
pack and the camcorder are used.
The camcorder counts from 1 to 10
seconds when you start recording. This
is helpful to avoid scenes that are too
short.
Indicates the remaining time of the tape
in minutes. "~" moves during
recording.
"~END"
flashes when the
tape reaches the end.
• When the time left is less than 15
seconds, the remaining tape time may
not appear.
• Depending on the type of the tape, the
indication may not be displayed
correctly.
"~"
flashes in red when the lithium
button battery is not installed, or when it
needs replacing.
26