Changing The Recording Mode (Sp/Lp) - Canon ZR600 Instruction Manual

54
Changing the Recording Mode (SPILPj
You can choose between SP (standard play) and LP (long play). LP extends the tape
usage by 1.5 times.
I
~~~)
I
r~ I~~
VCR SETUP
I~I
REC MODE STD PLAY
1. Open the FUNC. menu, select
(.~T)
the
r13
icon and press (@).
2. Select
(~T)
the [VCR SETUP] menu and press
(~).
Then, select
(~T)
the [REC MODE] option and press
(~).
3. Set
(~T)
it to [STD PLAY] or [LONG PLAY] and press (@) to save the
changes, then close the menu.
o
Tapes recorded in LP mode cannot be used for audio dubbing.
o
Depending on the nature and usage condition of the tape, picture and
sound recorded in LP mode may be distorted. We recommend using the
SP mode for important recordings.
_ 0 If you record in both SP and LP modes on the same tape, the playback picture
• may become distorted and the time code may not be written correctly.
o
If you play back a tape that has been recorded in LP mode with another digital
device on this camcorder, or vice versa, picture and sound may become
distorted.