Canon ZR600 Instruction Manual page 120

Playback
Problem Cause Solution
co
Pressing the playback button
does not start playback.
Camcorder is turned off, or is Set the camcorder to
not set to
(eLIY'[@)
mode.
(RI...A.~~l~I)
mode.
The TAPE/CARD switch is set Set the TApE/CARD switch to
to CARD. TAPE.
30
30
Image will not appear on the
TV screen.
Tape is running, but image will
not appear on the TV screen.
No sound from the built-in
speaker.
Cassette is not loaded.
Tape reached the end
("§] END" flashes on the
screen).
~
[AV-+DV] is set
to [ON].
TVNIDEO selector on the TV
is not set to VIDEO.
Video heads are dirty.
You attempted to play back or
dub copyright protected tape.
Speaker volume is turned off.
Load a cassette.
Rewind the tape.
Set [AV-+ DV] to [OFF].
Set the selector to VIDEO.
Clean the video heads.
Stop playback/dubbing.
Adjust the volume with the
[SPEAKER VOLUME] option.
17
30
75
33
113
32
Memory Card Operation
Problem Cause
Solution
co
120
Memory card cannot be
inserted.
Memory card cannot be
recorded.
Memory card cannot be
played back.
Image cannot be erased.
"Od "
flashes red.
Memory card was not facing
the correct direction.
Memory card is full.
Memory card is not initialized.
Memory card is not inserted.
File number reached
maximum value.
SO Memory Card is
protected.
Camcorder is not set to
(PI..~YIOdJ mode.
Memory card is not inserted.
Image is protected.
SO memory card is protected.
Card error occurred.
Turn the memory card over
and reinsert it.
Replace the memory card or
erase images.
Initialize the memory card.
Insert a memory card.
Set [FILE NOS.] to [RESET]
and insert a new memory
card.
Change the position of the
protect switch.
Set the camcorder to
(eI..AY·OdJ
mode.
Insert a memory card.
Cancel the protection.
Change the position of the
protect switch.
Turn off the camcorder.
Remove and reinsert the
memory card. Initialize the
memory card if flashing
persists.
80
80,9
4
95
80
83
80
91
80
93
80
95