Table of Contents
Advertisement
Mounting
5.5 Mounting with mounting plate
5.5.3
Fitting the mounting plate to an S7-300 standard rail
Procedure
Figure 5-9
Follow the steps below to fit the mounting plate to an S7-300 standard rail:
1. Place the mounting plate with the two protruding catches on the top edge of the S7-300
standard rail (position A in the figure above).
2. At the bottom, the mounting plate has two lugs with holes. Screw the lugs to the S7-300
standard rail (position B in the figure above). The required screws are supplied with the
mounting plate.
28
Side view of a mounting plate on an S7-300 standard rail
Operating Instructions, 11/2014, A5E03678337-07
SCALANCE W786-x
Advertisement
Table of Contents
