Table of Contents
Advertisement
How to remove the power supply adapter
NOTICE
Use only the pull-out loop (position A) when removing the power supply adapter from the
SCALANCE W786. This prevents the connector skewing on the back of the power supply
adapter and breaking off.
Follow the steps below to remove a power supply adapter from a SCALANCE W786:
1. Disconnect the power supply cable from the power supply adapter.
2. Remove the securing screw of the power supply adapter (position B).
3. Pull the loop (position A) to remove the plug on the rear of the power supply adapter from
the socket in the housing.
4. Remove the power supply adapter.
SCALANCE W786-x
Operating Instructions, 11/2014, A5E03678337-07
6.5 Connecting a power supply adapter
Connecting up
47
Advertisement
Table of Contents
