Removing / Fitting The Housing Cover - Siemens SCALANCE W786-x Operating Instructions Manual

Mounting

5.2 Removing / fitting the housing cover

5.2 Removing / fitting the housing cover
When does the housing cover need to be removed?
You can only perform the following activities when the cover is removed.
● You want to screw the SCALANCE W786 to a wall or onto the optional mounting plate.
● You want to connect cables to the SCALANCE W786 for the power supply, for Ethernet
or for external antennas.
● You want to insert a PLUG in the device or replace an existing PLUG.
● You want to use the reset button.
Removing the housing cover
Danger from line voltage
After removing the housing cover, there is a risk of touching live parts in the area of the
connecting terminals of the power supply adapter.
Only authorized personnel is permitted to open the device and carry out any work on the
open device (e.g. connection and disconnection of cables, operating the reset button,
replacing the PLUG)!
18
WARNING
Operating Instructions, 11/2014, A5E03678337-07
SCALANCE W786-x