HighPoint RocketRAID 2220 User Manual page 44

Ataii host adapter

Table of Contents

4 – Updating the Driver

To update the driver, simply reinstall the driver following the steps in previous section, " Install

RocketRAID 2220 Driver on an Existing System ".

Note: If the driver is loaded in initrd (when system is installed onto a disk or array attached to the

RocketRAID 2220), you need to run the mkinitrd command to update the initrd file. If you are using the

lilo boot loader, run lilo again (# lilo).

5 - Uninstalling the Driver

To uninstall the RocketRAID 2220 driver

Note: The driver cannot be uninstalled while the system is booted from a disk or array attached to the

Rocket RAID 2220.

To uninstall the driver, remove the lines added to /etc/modules.conf and /etc/fstab.

Table of Contents