Connecting To A Gps Receiver - Uniden UM380 Owner's Manual

If you connect the radio to a GPS receiver, the radio can automatically transmit your current

Connecting to a GPS receiver

position during an automated distress call or during a normal DSC call.
Your radio supports a standard NMEA0183 input from a GPS receiver. Follow the steps
below to connect your radio to your GPS receiver:
13.8V DC
1. Connect the BARE wire of the included accessory cable to the GROUND WIRE on your
GPS receiver.
2. Connect the YELLOW wire of the included accessory cable to the GPS DATA OUTPUT
WIRE on your GPS receiver. Below is a table of common GPS receivers and the proper
connections:
GPS MGF. Model Number(s)
GP1650,
Furuno
GP1850
Furuno GP30, GP36
Fixed Mount
Garmin
Models
Garmin Portable Models
JRC 100 Series
JRC 200 Series
JRC GPS500
Lowrance / Fixed Mount
Eagle Models
Lowrance /
Portable Models
Eagle
Fixed Mount
Magellan
Models
Magellan Portable Models
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Brown: NMEA_OUT (-)
Green: NMEA_IN (-)
White: NMEA_OUT (+)
Yellow: NMEA_IN (+)
Orange: N/A
Red: External Speaker (+)
Blue: External Speaker (-, GND)
Black: GND
Bare: Shield/GND
GPS NMEA0183
OUTPUT Wire Color
(Connect to YELLOW
WIRE on your radio)
White
White
Blue
Brown
Green
White
Yellow
White
Orange
Gray
Orange
Ground Wire Color
(connect to BARE
WIRE on your radio)
Black
Blue
Black
Black
Black
Black
Green
Black
Black
Black
Black
English
29