Making Dsc Calls - Uniden UM380 Owner's Manual

Follow the steps below to edit the MMSI numbers in your directory:
1. Press to display the call menu.
2. Select Directory. The screen displays any previously-entered MMSI numbers and names.
CALL-MENU
3. To add a new MMSI number to the directory, select New.
4. The radio prompts you to enter the nine-digit MMSI number. Use
to change the first digit; the
the
CHANNEL DOWN
5. When the first digit is correct, press
CHANNEL DOWN
the remaining eight digits of the MMSI number in the same way. If you make a mistake
while entering a number, press
moved to the left digit.
6. When the ninth digit is correct, press
7. The radio prompts you to enter a name for this MMSI number; the name is what you
will see in the directory list. Each name can be up to 12 characters. Use
to change the first character. The channel buttons scroll through the
available characters according to the following table:
CHANNEL DOWN
Channel Up Button
Capital letters (A through Z)
Lower-case letters (a through z)
Punctuation (/ ' + -)
Numbers (0 through 9)
8. When the first character is correct, press
One blank space
next character. Enter the remaining 11 characters of the name. If the name is shorter
than 12 characters, press and hold
and hold
directory list.) If you make a mistake while entering a number, press
the wrong number and the cursor is moved to left digit. ENT-1W/25W
9. When you finish entering the name, the radio displays the new MMSI number and name
and asks you to confirm. To save this directory entry, select Yes; to cancel this directory
entry, select No. The radio returns to the directory list.
10. To change an existing directory entry, select the entry you want to change.
11. To delete the directory entry, select Delete. To edit the code, select Edit, then use
and
12. When you are satisfied with the directory list, select Exit to close the menu screen.
CHANNEL UP CHANNEL DOWN
There are essentially four different types of DSC voice calls:

Making DsC Calls

Call type What it does
Distress Alerts all stations that you need
assistance and sends them your
current position.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
button decreases it.
ENT-1W/25W
to erase the wrong number and the cursor is
CLR-SCAN
ENT-1W/25W
ENT-1W/25W
without entering a name, the radio uses the MMSI number in the
ENT-1W/25W
to edit the MMSI number and the name.
button increases the number and
CHANNEL UP
. The cursor moves to the next digit. Enter
.
Channel Down Button
One blank space
Numbers (0 through 9)
Punctuation (/ ' + -)
Lower-case letters (a through z)
button. The cursor moves to the
Capital letters (A through Z)
to complete the name entry. (If you press
When to use it
In an emergency only.
and
CHANNEL UP
and
CHANNEL UP
to erase
CLR-SCAN
English
19