Changing The Motor Oil; Safety Instructions; General Safety Instructions - Fieldmann FZR 4625 BV User Manual

If you wish to replace the mowing blade, remove the bolt (Fig. 11). Perform the installation according to the
provided picture. Tighten the screw. The tightening torque is 40 Nm. When replacing the the blade, replace the
fastening bolt also.

CHANGING THE MOTOR OIL

Caution! For this task, we recommend that you contact an authorised service centre.
The drain plug is located under the engine
(Fig. 12 – point 1). Place a suitable container for
catching the used oil under the engine and remove
the plug. Tilt the lawnmower so that all the oil can
drain from the oil tank. After draining the oil, put the
plug back into the hole, making sure that the plug
is securely in its place and wipe away any drops of
spilled oil. Add type SAE30 or 15W-40 oil into the oil
tank. When the oil dipstick is inserted into the hole and
screwed in, the oil level should be between the Min and
Max marks (Fig. 12). Do not overfi ll the oil tank.
Start the engine and allow it to run for a short time.
Stop the engine, wait 1 minute and remeasure the
oil level in the oil tank. Add oil to the required level if
necessary.

8. SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

This product is used exclusively for mowing grass. Do not use it for any other purposes than those intended.
Otherwise there is a risk of damaging it or an injury.
Never allow children or persons who are not acquainted with the contents of this user's manual to work with
the machine.
The person operating the lawnmower is responsible for the safety of persons in the work area.
Never operate the lawnmower in the near vicinity of other people, children or freely roaming animals.
Before starting mowing, check the terrain where the lawnmower will be used and remove stones, wires,
sticks, splinters, bones and other foreign objects, which could become caught in it or defl ected or cause
injuries.
PETROL LAWNMOWER
Controlling and operating the lawnmower | Safety instructions
Fig. 11
Fig. 12
USER'S MANUAL
13 EN