Accessibility And Voice Quality - Aastra DT292 User Manual

Cordless telephone for aastra mx-one and aastra md110
Hide thumbs Also See for DT292:
Table of Contents

Advertisement

Important User Information
16

Accessibility and voice quality

The base network is not always available. If you do not get in
contact with your system, contact your system administrator. For
best voice quality, avoid positioning near computer, radio or similar
euqipment.
Operating area
You can use your cordless telephone in the area that is covered by
the network. Outside this area you will lose contact with the
telephone network. The signal strength icon will disappear and
will be displayed.
network
Out of coverage
When you leave the system's coverage area there will be a short
beep and a lamp indication.
When re-entering the coverage area it can take a couple of minutes
before the phone automatically has registered into the system.
Networks (menu option)
The menu option
Networks
purposes by service staff. Using this menu option may cause a
logout from the DECT/GAP network, and no further calls will be
possible.
Note: In case of a logout, the phone must be logged on
again by a service technician.
should only be used for administration
No
DT292

Advertisement

Table of Contents
loading

Table of Contents