Table of Contents
Advertisement
a) If channel is set as the primary mode, turn the
MFK until the display shows the desired
channel.
If channel is not set as the primary mode, press
the MFK once and repeat this step.
b) Press the PTT button to begin transmitting on
the displayed channel.
•
Select a channel via the preprogrammed 16–
Position Select Knob to the desired channel.
a) Rotate the preprogrammed 16–Position
Select Knob to the desired channel.
b) Press the PTT button to transmit on the
displayed zone channel.
•
Select a channel via the radio menu Chan:
a)
or
to Chan.
b) Press the Menu Select button directly below
Chan.
c)
or
d) Press the Menu Select button directly below
Sel to confirm the selected channel.
e) Press the PTT button to transmit on the
displayed zone channel.
58
English
to the required channel.
•
Select a channel via the radio menu Channel Up
or Channel Down:
a)
or
to ChUp or ChDn.
b) Press the Menu Select button directly below
ChUp or ChDn.
Positions of ChUp and ChDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c) Press the PTT button to transmit on the
displayed zone and channel.
Mode Select Feature
Mode Select allows a long press to save the current
zone and channel of your radio to a programmable
button, keypad button, or a softkey; then once
programmed, the short-press of that button or softkey
changes the transmission to the saved zone and
channel.
There are two methods to save the selected zone and
channel:
•
Softkeys
•
Programmable buttons
Advertisement
Table of Contents
