Motorola APX 2000 MODEL 2 User Manual page 109

Hide thumbs Also See for APX 2000 MODEL 2:
Table of Contents

Advertisement

2 Press the Menu Select button directly below
Reky.
3 Perform one of the following actions:
Press the PTT button to send the rekey
request.
Press the PTT button again, or the Home or
Emergency button, to exit the feature and
transmit in normal mode.
If the rekey operation fails, you hear a bad-key
tone and the display shows Rekey fail.
Note: The rekey operation failure indicates that
your radio does not contain the Unique Shadow
Key (USK).
MDC Over-the-Air Rekeying (OTAR) Page
This feature allows you to view or define MDC Over-
the-Air Rekeying (OTAR) features. It is applied only
when operating in secure encrypted mode and only
for conventional communications. In additional to
Rekey Requests, OTAR transmissions include
Delayed Acknowledgements, and Powerup
Acknowledgements.
Some of the options selected may also need to be set
up at the Key Management Controller (KMC) site to
work properly.
Note: This feature must be preprogrammed by a
qualified radio technician. Check with your dealer or
system administrator for more information.
Infinite UKEK Retention
This feature enables Unique Key Encryption Key
(UKEK) to be permanently stored in the radio even
when all of the encryption keys is erased. Without this
UKEK key, the radio could not be over the air
rekeyed.
Note: This feature must be preprogrammed by a
qualified radio technician. Check with your dealer or
system administrator for more information.
Hear Clear
Note: This feature must be preprogrammed by a
qualified radio technician. Check with your dealer or
system administrator for more information.
There are two components of Hear Clear.
105
English

Advertisement

Table of Contents
loading

Table of Contents