Hardware Settings - Starcom Systems Kylos User's Manual Manual

Kylos and Kylos Compact Users Guide

Hardware settings

This tab allows you to configure various hardware settings.
Use 57600 baud rate – if this option is activated, the device will use 57,600
bps to communicate.
Light sensor alerts – light sensor enabling option. Once activated, the unit
will transmit Light On / Light Off alerts based on the light sensor readings.
Use location updates – GPS enabling option. Once activated, the unit's GPS
module will be turned on upon every transmission, and location update
transmissions will be sent.
Use debugging beeps – factory testing setting. Do not use.
Transmit after first start-up or restart – if this option is activated, a
"Power On" message will be transmitted whenever the unit is powered on for
the first time, or gets restarted.
Temperature Low / Temperature High – temperature sensor parameters
used to define the values for low and high temperature alerts.
Weak Impact / Strong Impact –accelerometer parameters used to define
two types of impact (hit, push, drop. etc.) on the device.
Force (g) – determines the threshold of the force needed to be measured in
order to send an alert. Select "Disabled", if you don't wish to use the alert.
Duration (msec) – determines the duration of the force needed to be
measured in order to send an alert.
www.starcomgpsglobal.com 39