Starcom Systems Kylos User's Manual Manual page 65

Kylos and Kylos Compact Users Guide
Power On – alert that is sent when the unit turns on.
Light On/Light Off – event which alerts upon a change of light inside
the container. The Tetis light sensor readings are indicated by
numerical values (when the unit is located in a well-lighted place the
light sensor value will be higher than in a dark place). Those values
appear on the Map page and in the reports.
Temperature High/Temperature Low – alert sent when the unit's
temperature sensor detects when the temperature gets lower or higher
than the defined low and high temperature values.
No Activity – this event can be used to receive alerts when devices
have stopped transmitting. The default value is 336 hours (2 weeks).
Enter the cellular number and email for the notification to be sent to in the
Notify for section.
Press Apply. The new monitoring event is saved.
Once the events are generated by the units, they will appear on the Monitor
page. You will also receive a notification by SMS. The email notifications are
accumulated and sent once every half an hour to avoid spamming.
www.starcomgpsglobal.com 65