Connecting The Unit To The Computer Kylos - Starcom Systems Kylos User's Manual Manual

Kylos and Kylos Compact Users Guide

Connecting the unit to the computer Kylos

Connect the USB cable connector to the USB port on your computer.
Connect the 5 pin connector to the unit, so that the 2 pins on the cable are
pointed towards the upper part of the unit and the 3 pins on the cable point
towards the battery.
NOTE: The unit enters sleep mode to save the battery power whenever
possible. This means that during the testing process you must keep the unit
awake in order to check its functionality.
After you insert the SIM card and the battery, the unit will spend about 5
minutes to attempt connection to the cellular network and to GPS. During
this time it will be awake, which will allow you to connect it to the computer
and start the configuration.
After the unit performs the connection attempt, it will enter sleep mode. You
can wake the unit by removing the battery and inserting it back again.
www.starcomgpsglobal.com 26