Hardware Settings - Starcom Systems Triton User Manual

Triton User Guide

Hardware settings

This tab allows you to configure various hardware settings.
Use 57600 baud rate – if this option is activated, the device will use
57,600 bps to communicate.
Light sensor alerts – light sensor enabling option. Once activated, the unit
will transmit Light On / Light Off alerts based on the light sensor readings.
Use location updates – GPS enabling option. Once activated, the unit's GPS
module will be turned on upon every transmission, and location update
transmissions will be sent.
Use debugging beeps – factory testing setting. Do not use.
Transmit after first start-up or restart – if this option is activated, a
"Power On" message will be transmitted whenever the unit is powered on for
the first time, or gets restarted.
Temperature Low / Temperature High – temperature sensor parameters
used to define the values for low and high temperature alerts.
33