Starcom Systems Kylos User's Manual Manual page 60

Kylos and Kylos Compact Users Guide
Most of the types listed here relate to the Helios units. The event types that
can be used for Tetis are: Perimeter, Roaming and GPRS.
Set the necessary Value. You can leave the Condition as "Changeable", later
you will be able to change it in the event itself. Select the necessary operand
in the Operand list, as follows:
And – when you create several events, this event and the following one will
be performed simultaneously.
And then – when you create several events, the following event will start
only after the first one is performed.
Transmit – the event will be transmitted.
End – ends an event. For example, you can create an output event, which
after it performs the necessary actions will simply end.
You can create a complex event type, which consists of several events.
When finished, click Apply. The new event type is saved.
To create a new event, click New in the Events section.
Enter the name of the event in the Name field. In the Units list, select the
units you want to include in the event and click Add. The units will be
moved to the Available for list.
www.starcomgpsglobal.com 60