Installation Kylos; Installations Kylos Compact - Starcom Systems Kylos User's Manual Manual

Kylos and Kylos Compact Users Guide
6 Installations Kylos
Disconnect the USB cable from the unit. Carefully remove the battery and
place it back to reset the unit. Close the unit cover.
The unit is now ready to be installed.

Installations Kylos Compact

Disconnect the USB cable from the unit. Press and hold the Power button to
turn the unit off.
Before installing the unit, press the Power button and make sure the LED
color is green. Otherwise recharge the battery.
Charge the battery for at least 12 hours prior to first use. After that, charge
the battery for at least 6 hours before each use.
Before installing the unit, press and hold the Power button until you see the
LED flash 5 times with white light. Release the button and make sure that
both green and red blinks are over.
Make sure you get a notification for the Button On.
www.starcomgpsglobal.com 45