Vivax ACP-24COFM70GEI User Manual page 67

ELECTRICAL CONNECTIONS
G W H D ( 2 8 ) N K 3 A O :
1.Ｒ emove the handle at the right side plate of the
outdoor unit (one screw).
.
2
Remove the cable clamp, connect the power connection
cable with the terminal at the row of connection and fix
the connection. The fitting line distributing must be
consistent with the indoor unit. terminal of line bank.
Wiring should meet that of indoor unit.
3.
Fix power connection wire by wire clamp.
4.
Ensure wire has been fixed well.
5.
Install the handle.
Blue
Power
cord
To the power supply
HANDLING
After having removed the packaging, check that the con-
tents are intact and complete.
The outdoor unit must always be kept upright.
To unit A
YEGN
Blue
YEGN
Brown
Black
Brown
Power
connecting
cord
An all-pole disconnection switch having a contact
separation of at least 3mm in all pole should be
connected in fixed wiring.
Wrong wire connection may cause malfunction of some
electric components.After fixing cable, ensure that
leads between connection to fixed point have some space.
The connection pipes and the connectiong wirings of
the unit A and unit B must be corresponding to each
other respective.
The appliance shall be installed in accordance with
national wiring regulations.
Do not install the outdoor unit where it is exposed
to the sunlight.
Handle
To unit B To unit C
Blue YEGN
Blue
Brown
Power
Black
Black
connecting
cord
Handling must be done by suitably equipped qualified
technical personnel using equipment that is suitable for
the weight of the appliance.
To unit D
YEGN
Blue
Brown
Power
Power
Black
connecting
connecting
cord
cord
INSTALLER
YEGN
Brown
USER
5