Troubleshooting - Huviron SK-S200 User Manual

Problem
Initial operation is not working.
Nothing appears on the screen.
The image on the screen is dim.
The image on the screen flickers.
The image is not clear.
The image on the screen is dark.
The color of the picture is not
matched.
PTZ operation is not working.
Aux output is not working.
The time is not matched current
time.

[Troubleshooting]

ㆍCheck the power cord and line connection.
ㆍCheck the adaptor for the camera.
ㆍIs there no fuse or disconnected fuse?
Check the current consumption and use the recommended fuse.
ㆍCheck the video cable and line connection.
ㆍIs dome stained with dirt?
ㆍAdjust the lens ' focus properly.
ㆍIs the camera facing to fluorescent lighting?
Change the camera position.
ㆍAdjust the sharpness feature of the camera.
ㆍPlease make sure your monitor status.
ㆍAdjust the contrast feature of the monitor.
ㆍAdjust the brightness feature of the camera.
ㆍAdjust the white balance feature of the camera.
ㆍCheck the communication cable and line connection.
ㆍCheck the number & protocol setting between the camera and
controller.
ㆍDid you connect some equipment with the camera during NC
or NO?
Please recheck your equipment.
ㆍCheck the battery.
56
<Supplement> Troubleshooting
Solution