Shutdown Wizard - Stratasys Objet260 User Manual

Objet260 User Guide
Shutdown
To run the Shutdown wizard:
Wizard
1. Start the Shutdown wizard from the Options menu.
2. Click Next.
3. Select the option corresponding to the length of time that the printer will
Note: Before selecting More than 10 days, make sure that cleaning-fluid
cartridges are available.
DOC-37004 Rev. E
Figure 6-16 Shutdown wizard, opening screen
not be used—less or more than ten days.
Figure 6-17 Shutdown options
6 Operating and Maintaining the Objet260 3D Printer
6-21