Preparation For Using The Moderator Function - Sanyo WXU700 - WXGA LCD Projector Owner's Manual

Chapter 8 Network capture functions

Preparation for using the moderator function

First, follow the procedure in "2. Setup Procedure" ➔ "Step 1–3" (p.18) and confirm that the setting
status is set as written below.
• Network Capture 5 is installed on the moderator's computer and each client's computer and
each computer image can be projected.
Following application window appears when the Network Capture starts. After clicking Moderator
registration button, the application window changes to "Moderator mode" window as shown in the
lower picture below.
Normal mode application window
Projector list
Moderator
registration
Moderator mode application window
Projector list
10
Status of use
Join moderator's
group
Status of use User
Delete moderator's registration
Parameter
setting
Client list
Start real time
capture
Terminate capture
One-shot