Using The Bank Buttons - M-Audio code25 User Manual

Using the Bank Buttons

The faders, buttons, and encoders all have multiple banks. You can use the Bank Right/Left
() buttons to move to the next or previous bank. You can set these buttons to change the
bank for all controls or for controls in a specific mode only.
The mode of the Bank Right/Left () buttons determines which controls it affects. Only the
controls that are in that same mode will change banks.
To change the Bank Right/Left () buttons' mode, press and hold Shift, and then press
one of the Bank Right/Left () buttons. Their current mode is distinguishable by their color
and the message shown in the display.
All Mode (white, ALL)
Pressing the Bank Right/Left () buttons will change the bank for all controls
regardless of their modes.
When you press the Bank Right/Left () buttons, the current bank will appear in
the display as A1, A2, A3, or A4.
MIDI Mode (red, MIDI)
Pressing the Bank Right/Left () buttons will change the bank for all controls in
MIDI Mode.
When you press the Bank Right/Left () buttons, the current bank will appear in
the display as MIDI1, MIDI2, MIDI3, or MIDI4.
Mackie Control/HUI Mode (green, MACHUI)
Pressing the Bank Right/Left () buttons will change the bank for all controls in
Mackie Control/HUI Mode.
When you press the Bank Right/Left () buttons, only M/H will appear in the
display, but you will still be moving to the next or previous bank (of 4 total).
HID Mode (yellow, HID)
Pressing the Bank Right/Left () buttons will change the bank for all controls in
HID Mode.
When you press the Bank Right/Left () buttons, the current bank will appear in
the display as H1, H2, H3, or H4.
Note: If you change the mode of the faders, buttons, or encoders, they will automatically be
in the bank that you most recently selected in that mode. For example, if the faders are in MIDI
Mode Bank 3 and the buttons are in HID Mode Bank 2, the buttons will automatically be in
Bank 3 if you change them to MIDI Mode.
27