Volume Pedal; Editing Assignments; Channel - M-Audio code25 User Manual

Volume Pedal

Editing Assignments

You can set the channel of the volume pedal. See
To learn how to assign MIDI CC messages to the volume pedal, see the

Channel

To set the MIDI channel for the volume pedal:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Move the volume pedal. VOL will appear in the display.
3. Press the Chan Assign key. The display will show CHN for 1 second and then show VOL
and current MIDI channel or zone channel.
4. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter the desired MIDI
channel (00 or 01–16) or zone channel (17–20).
Note: Values 00 and 01–16 correspond to Code 61's global channel and the 16 available
MIDI channels. Values 17–20 correspond to channels used by Zones 1–4 (z1–z4).
5. Press the Enter key. The volume pedal will be assigned to that channel, and you will exit
Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Channel to learn how to do this.
Messages section.
94