External Data Storage Device Connected To Usb Port; Instructions And Restrictions; Ipod, Ipad And Iphone; Disconnecting - Seat ibiza Owner's Manual

External data storage device connec-
ted to USB port 
Depending on the features and the country,
the vehicle may have a USB - AUX-IN connec-
›››
tion Booklet Instruction
Audio files on an external data storage de-
vice connected to the USB port  can be
played and controlled via the Infotainment
system.
Where this manual refers to external data
storage devices, this means USB mass stor-
age devices containing supported audio
files, such as MP3 players, iPods™ and USB
sticks.
Only supported audio files are displayed and
played. Other files are ignored.
Further operation of the external data medi-
um (changing track, selecting tracks and
playback modes) is described in the appro-
priate chapters of this manual

Instructions and restrictions

Compatibility with Apple™ devices and other
media players depends on the unit.
1)
Due to the large number of different data storage
devices and various iPod™, iPad™ and iPhone™
generations available, it is not possible to guarantee
fault-free operation of all functions described here.
22
The USB port  supplies the usual USB volt-
age of 5 volts for a USB connection.
External hard disks with a capacity greater
than 32 GB must be reformatted for the
FAT32 file system in some circumstances. You
Manual.
will find the necessary software and informa-
tion on the Internet.
Take into account all other instructions and
limitations regarding requirements for media
›››
sources
iPod™, iPad™ and iPhone™
Depending on the country and the equip-
ment, iPods™, iPads™ or iPhones™ can be
connected using the device's USB cable to
the USB port  of the vehicle and used as
audio sources.
After connecting an iPod™, iPad™ or
iPhone™, the specific list views of the iPod
are displayed in the upper selection level
››› (  Playlists ,  Artists ,  Albums ,
page 18.
 Tracks
Media
page 18.
,  Podcasts etc.).
Possible error messages after connecting an
1)
external data storage device
The device is not compatible
Cause Procedure
The external data carri- Check the connection and
er cannot be played or make sure the external data
communication is not storage device is working cor-
possible with the rectly.
adapter cable being If possible, update the exter-
used. nal data storage device soft-
ware.
The device does not work
Cause Procedure
Communication fault. Check the connection and
make sure the external data
medium is working correctly.

Disconnecting

Any connected data storage devices must be
prepared before their disconnection in order
to remove them.
● In the Media main menu, press the
button to open the Media Set-
SETTINGS
tings menu.