Memory Buttons; Select, Tune And Store Stations To Memory - Seat ibiza Owner's Manual

Memory buttons

Group of stored stations
Fig. 13
In the RADIO main menu you can store sta-
tions of the frequency band selected at that
time, using the 12 numbered function but-
tons. These function buttons are called
"memory buttons".
Activating a station using the memory but-
tons
● Press the memory button corresponding to
the required station.
A stored station can only be activated using
the memory button if it can be received in the
place where you are at that moment.
Switching between memory banks
● Press the function button,
The memory buttons are displayed in groups
of 4 function buttons, respectively (
14
and ). It is also possible to change mem-
9-12
ory banks by using the  and  buttons on
the touchscreen.
Viewing the memory buttons
If the radio text can be seen but not the mem-
ory buttons, press radio text to display the
stored memory buttons again.
Storing stations on memory buttons
See: Storing stations
Select, tune and store stations to
memory
Selecting a station
Select the sta-
tion with the
arrow buttons
 
Selecting a
station from a
station list
›››
Fig. 13.
BAND
,
1-4 5-8
Radio
›››
table on page 14.
Press the or the function button.
 
This will change between stored or
available stations, depending on the
setup of the arrow buttons. Arrow but-
tons setup in the Setup (FM, AM
›››
menu page 16.
and DAB)
Press the function button to
Stations
open the list of stations. Go through
the list and select the desired station
by pressing it. Press the func-
BACK

tion button to return to the previous
screen.
Selecting a station
To update the The list of stations in the FM frequency
list of stations band is automatically updated. For the
AM and DAB frequency bands, press
the function button
Update
the station list.
Manually tuning in a station frequency.
Viewing the Briefly press the
Manual
frequency dial ton.
Adjusting the Press the buttons + – , to the right and
frequency in left of the frequency band.
stages OR: Turn the adjustment knob.
Quickly brows- Place your finger on the slider in the
ing the fre- frequency dial and drag it along the
quency band dial.
Hiding the fre- Briefly press the button
quency band
Storing stations
Storing the Hold down the desired memory button
station being until you hear the signal. The station
listened to that you are listening to will be stored in
on a memory this memory button.
button
to update
function but-
.
Manual